RTU32/BC6000 SNMP Alarm & Control
Flexible SNMP Alarm & Control for Network Management Application
As an SNMP agent, the primary role of RTU32/BC6000 is to mediate remote site alarms to SNMP traps and forward them to SNMP Network Managers.
It is easy to filter out any unimportant data as you can select to not send a trap for each individual alarm, although, of course, all inputs can be mediated to SNMP traps. The analogue inputs send traps for up to 4 thresholds. The SNMP Manager can retrieve live actual readings from analogue inputs by issuing Get and GetNext commands. Set commands issued to the RTU32 will activate the control output relays, for turning onsite equipment on and off, locking and unlocking doors etc.
The RTU32/BC6000 supports up to several hundred I/O of each type. Additional I/Os are connected easily via I/O Expansion modules and the following I/Os can be provided;
- Digital inputs: 12-24VDC, 24-72VDC and 110-230VAC
- Digital outputs: PNP 12-24VDC and relay outputs
- Analogue inputs: 0-10V, -10-10V, 0-20mA, 4-20mA, Pt100 and thermocouple sensors
The RTU32/BC6000 SNMP can report up to 4 SNMP managers at different IP addresses simultaneously, which makes it easy to filter alarms to different departments.
As the RTU32/BC6000 SNMP is using OS WinCE, the basic Microsoft WinCE SNMP Agent provides you with additional device network information and statistics.
Optional support for advanced functions for handling of I/O transfers over your network and local data manipulation.
